# Corridor definition: WHICH lights and WHERE each input comes from. # Edit this file to change the corridor; everything in build/ regenerates from it. # Directions: Big Bend is the main road (NB = northbound, SB = southbound); # the cross street is the side road (EB, WB). Approach = traffic driving INTO the light from that direction, # e.g. NB approach = cars on the Big Bend leg SOUTH of the light, heading north. [corridor] name = "Big Bend Blvd, Forest Park Pkwy to Clayton Rd (St. Louis County, MO)" main_road = "Big Bend Boulevard" peak = "PM" order = ["051", "040", "063", "034"] # north -> south, County signal numbers # Count sources for each approach. # county: = St. Louis County count station (two-way volume on that leg; peak hour volume) # modot: = MoDOT 2025 directional AADT for that road (converted to peak hour in derive.py) [lights.051] name = "Forest Park Pkwy" cross_street = "Forest Park Parkway" side_class = "major" NB = "county:132" # Big Bend @ Forest Park Pkwy S (2026) SB = "county:1063" # Big Bend @ Forest Park Pkwy N (2026) EB = "county:388" # Forest Park Pkwy @ Big Bend W (2024) WB = "county:387" # Forest Park Pkwy @ Big Bend E (2026) # Lanes AT the light (approach lanes incl. turn bays), from OpenStreetMap turn:lanes tags. Overrides MoDOT segment lanes. lanes = { EB = 3, WB = 3 } # OSM: one approach left|through|through|right, the other left|(2 lanes); conservative 3 each [lights.040] name = "Forsyth" cross_street = "Forsyth Boulevard" side_class = "minor" NB = "county:1064" # Big Bend @ Forsyth S (2018) SB = "county:123" # Big Bend @ Forsyth N (2018) EB = "modot:FORSYTH BLVD" WB = "modot:FORSYTH BLVD" lanes = { EB = 3, WB = 3 } # OSM: Forsyth widens to 4 lanes near Big Bend (lanes:backward=2) -> 2 through/right + left bay at the light; MoDOT mid-block 1 [lights.063] name = "Wydown" cross_street = "Wydown Boulevard" side_class = "minor" NB = "county:1062" # Big Bend @ Wydown S (2026) SB = "county:1064" # Big Bend between Forsyth and Wydown (= Forsyth S station, 2018) EB = "modot:WYDOWN BLVD" WB = "modot:WYDOWN BLVD" lanes = { EB = 2, WB = 2 } # OSM: Wydown is a divided boulevard, 2-3 lanes on approach carriageways [lights.034] name = "Clayton Rd" cross_street = "Clayton Road" side_class = "major" NB = "county:118" # Big Bend @ Clayton Rd S (2026) SB = "county:117" # Big Bend @ Clayton Rd N (2026) EB = "county:247" # Clayton Rd @ Big Bend W (2017) WB = "county:246" # Clayton Rd @ Big Bend E (2017) lanes = { EB = 4, WB = 4 } # OSM: Clayton Rd carriageways are 4 lanes at the light (left + 2 through + right); MoDOT mid-block 2-3 # Stations used to measure this corridor's own peak-hour factor (peak hour / average weekday). [peak_factor] stations = [132, 1063, 123, 1064, 1062, 117, 118, 388, 387, 247, 246] # Network clean-up applied on top of OpenStreetMap (each one a known OSM gap; checked against MoDOT / street view). [network] source = "generated" # "generated" = clean corridor from corridor.json (default); "osm" = full OpenStreetMap network bay_m = 90.0 # ASSUMED left-turn bay length (generated network); typical urban 75-100 m, not measured rbl_speed_threshold = 0 # no "yield to the right" junctions: OSM gives unsigned residential corners equal priority [network.lanes_by_name] # streets with no OSM lane tags "North Big Bend Boulevard" = 2 # MoDOT 2025: 2 lanes per direction north of Forsyth [network.lanes_by_edge] # individual OSM splitting artifacts "103632499#0" = 4 # Clayton Rd WB stop-line stub drawn as 2 lanes after a 4-lane approach # Measured County data (data/measured/): which count hour and which timing pattern are the design case. [counts] design_hour = "17:00" # 5:00-6:00 PM: peak hour at Forsyth, Clayton Rd and Forest Park Pkwy counts; inside the PM plan window [timing] pattern = "37" # County PM weekday pattern (3:00-6:30 PM M-F) at all four lights [sumo] right_on_red = true # Missouri allows right turn on red unless signed; SUMO state "s" (stop, then go if clear) signal_program = "nema" # "nema" = County's real phase sequence scaled to each plan (needs timing sheets); "two_phase" = model's 2-phase